Electric Motor, Pump, Heater, Car Part, Dayton, Trane, John Deere Valve, Watts, Inverter, Controller, Genteq, Carrier, Industrial Products Millipak MPVL20CA3 200 Filter Unit 0.1 µm Gamma Compatible Millipore – First Rate Parts
The best way to find the part you are looking for is to search in this bar by part number, brand, or key word
Cart 0
Millipak MPVL20CA3 200 Filter Unit 0.1 µm Gamma Compatible Millipore

Millipak

Millipak MPVL20CA3 200 Filter Unit 0.1 µm Gamma Compatible Millipore

$335.99 $785.00
We are closed for annual maintenance until May 3. All of our items are unique and in stock. Available on a first come, first serve basis. Once they are gone, they are gone. Please check back on this date to purchase. Thank you, First Rate Parts

Millipak MPVL20CA3 -200 Filter Unit 0.1 µm Gamma Compatible Millipore 9/16 in                      

LAST ONE!!!

IN STOCK, Ships immediately!!

This is the CHEAPEST price ANYWHERE on a genuine part.

This is new, never used or installed.

THIS IS A GENUINE OEM MILLIPAK FILTER SET OF 3!! THIS IS NOT A CHEAP AFTERMARKET OR USED PART THAT WILL NOT LAST AND WILL NEED REPLACED!! DON'T WASTE TIME, MONEY, AND HASSLE REPLACING IT AGAIN!

SOLD AS A SET OF THREE FILTERS AS PICTURED. MULTIPLE QUANTITIES OF SETS OF THREE MAY BE AVAILABLE AS INDICATED IN AVAILABLE QUANTITY.

Get the best price ANYWHERE HERE!!!

Get your genuine high end part for much cheaper here.  Don't worry about old used parts breaking, this is brand new.  Don't settle for used parts this is brand new.  BETTER BUILT!!!

This part sells for over $785

Description
Catalogue Number MPVL20CA3
Trade Name
  • Millipak®
Description Gamma Compatible Millipak®-200 Filter Unit 0.1 µm 9/16 in. HB/HB
Product Information
Device Configuration Capsule
Connections, Inlet/Outlet 14 mm (9/16 in.) Hose Barb
Maximum Differential Pressure, bar (psid) Forward: 4.1 bar (60 psid) @ 25 °C; 1.7 bar (25 psid) @ 80 °C; 0.35 bar (5 psid) @ 123 °C; Reverse: 0.7 bar (10 psid) @ 25 °C
Maximum Inlet Pressure, bar (psi) 5.2 bar (75 psi) @ 25 °C
Good Manufacturing Practices These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Biological Information
Bacterial Endotoxins Aqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
Media Durapore®
Sterilization 3 autoclave cycles of 90 min @ 123°C; not in-line steam sterilizable
Bacterial Retention Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
Wettability Hydrophilic
Physicochemical Information
Pore Size 0.1 µm
Inlet Connection Hose Barb
Outlet Connection Hose Barb
Bubble Point at 23 °C ≥4830 mbar (70 psig) air with water
Flow Rate 8.5 L/min @ 2.45 bar ΔP
Gravimetric Extractables The extractables level was equal to or less than 5 mg per device after 24 hours in water at controlled room temperature.
Non-Fiber Releasing This product was manufactured with a Durapore® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
USP Bacterial Endotoxins A sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
Dimensions
Length 13.0 cm (5.1 in.)
Diameter 7.6 cm (3.0 in.)
Filtration Area 1000 cm²
Process Volume 100 L
Inlet Connection Diameter 9/16 in.
Outlet Connection Diameter 9/16 in.
Materials Information
Chemistry
  • Polyvinylidene Fluoride (PVDF)
Device Material
  • Polycarbonate
Support Material Polycarbonate
Vent Cap Material Polyvinylidene fluoride (PVDF)
Packaging Information
Material Size 3
Material Package Double Easy-Open bag

Specifications
Oxidizable Substances Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥200 mL

Share this Product


More from this collection