Leeson 119527.00 Washdown Motor Stainless Steel 1HP 230V 460V 3PH 56C 1800 RPM
IN STOCK, Ships immediately!!
This is a new, never used or installed motor that is being sold for parts due to the end cap not screwing on the end. It seems that either the cap is warped or the threaded housing is not threaded correctly. You will likely need to re-use your existing end cap and possibly swap out the threaded housing of the motor itself. Alternatively, you could simply screw the cap on part way and then put a bead of silicone around the periphery of the cap and this will also seal the end cap. This part has been discounted due to this issue. The motor itself is new and fully functional.
SOLD FOR PARTS, NO RETURNS
No additional parts or components are included beyond the items as shown in pics.
This part sells for over $1585
Phase: | 3 | Output HP: | 1 & 0.75 Hp |
Output KW: | 0.75 & 0.56 kW | Voltage: | 230/460 & 190/380 V |
Speed: | 1750 & 1450 rpm | Service Factor: | 1.15 & 1.15 |
Frame: | 56C | Enclosure: | Totally Enclosed Non Ventilated |
Thermal Protection: | No Protection | Efficiency: | 85.5 & 84 % |
Ambient Temperature: | 40 °C | Frequency: | 60 & 50 Hz |
Current: | 2.8/1.4 & 2.6/1.3 A | Power Factor: | 77.7 |
Duty: | Continuous | Insulation Class: | F |
Design Code: | B | KVA Code: | N |
Drive End Bearing Size: | 6205 | Opp Drive End Bearing Size: | 6205 |
UL: | Recognized | CSA: | Y |
CE: | Y | IP Code: | 69 |
Number of Speeds: | 1 |
Technical Specifications
Electrical Type: | Squirrel Cage Inverter Rated | Starting Method: | Line Or Inverter |
Poles: | 4 | Rotation: | Reversible |
Resistance Main: | 0 Ohms | Mounting: | Rigid Base |
Motor Orientation: | Horizontal | Drive End Bearing: | Ball |
Opp Drive End Bearing: | Ball | Frame Material: | Stainless Steel |
Shaft Type: | NEMA 56 | Overall Length: | 12.22 in |
Frame Length: | 7.00 in | Shaft Diameter: | 0.625 in |
Shaft Extension: | 2.06 in | Assembly/Box Mounting: | F1 ONLY |
Inverter Load: | CONSTANT 3:1 |
Fits: (may fit various models, you are responsible to verify this is the correct part number for your application)